Please enable JavaScript to view this site.
*HPT printers normally support all the fonts, image overlays, barcodes etc. which are available in CPPD.
Duplex Printing
*NO |
The output is printed on one side of the paper |
*YES |
The output is printed on both sides of the paper, with the top of each printed page at the same end of the sheet of paper |
*TUMBLE |
The output is printed on both sides of the paper, with the top of one printed page at the opposite end from the top of the other printed page. This is usually used for output that will be bound at the top |
*FORMDF |
The output is printed on both sides of the paper if the duplex value is specified in the form definition. If a form definition is not specified, then the output is printed on one side of the paper |
Rotation
The orientation of the print.
0/blank |
Portrait |
1 |
Landscape |
No print border
*HPT printers usually add a 'no print border' of around 1/4 inch (360x1440'ths inch) and this is automatically included as 360. CPPD automatically compensates for the 'no print border' for *AFP enabling *HPT and *AFP output to look the same when printed.
Page Width
Here you can specify the width of your output page.
Page Height
Here you can specify the height of your output page.